Enter our Secure Online Store

 

	ANDERSEN self-tailing winches. Stainless steel Power Rib© drum. Extended service life of your sheets, halyards and the winch itself, since the Power Rib and the smooth surface of the drum require fewer turns compared to other winches. Size 28ST: 9.5:1 / 26.5:1 power ratio, 2 speed - $849.99  #67061 Size 40ST: 8.5:1 / 39.5:1 power ratio, 2 speed - $1,049.99  #67062 Size 46ST: 15.5:1 / 46.6:1 power ratio, 2 speed - $1,349.99  #67063
Larger Pic	Steal Shield is an anti theft device that deters theft of light and medium weight trailers using a standard 1 7/8, 2, or 2 5/16 inch lever lock hitch system. The Steal Shield is a heavy duty steel sleeve that is sealed at one end and open at the other. The sleeve has slots on each side at the open end that a flat metal locking bar slides through. The sleeve slides over the trailer hitch and the locking bar slides through the slots in the sleeve, which places the locking bar behind the hitch lever locking device. Once in place, the locking bar is held in place by means of a self contained lock and pin mechanism, thus making the trailer virtually inoperable and immovable, deterring the theft of the trailer and contents. Trying to remove the Steal Shield by force would result in damage to the trailer hitch that would render the hitch assembly inoperable. $79.99  #165847
	Fulton 50" Boat Guides help you keep the boat centered and provide extra trailer visibility, saving time and possible damage, when launching and loading. Universal bolt-on mounting system fits all trailer frames up to 3" wide by 5" tall, no drilling or cutting required. Unique, non-marring, marine grade PVC uprights extend 50" up from frame, helping to prevent hull damage, and providing trailer visibility when backing up. Features side-to-side adjustment, allowing optimum fit to any trailer. Keep trailer lights high, dry and visible with the convenient mounting kit, allowing trailer lights to be fitted to boat guide uprights. Mounting instructions and all necessary hardware included. Item #0921500100. $83.33
	Fulton Boat Guides help you keep the boat centered, saving time and possible damage when launching and loading. Universal bolt-on mounting system fits all trailer frames up to 3" wide by 5" tall, no drilling or cutting required. Unique non-marring, marine grade PVC uprights extend 44" up from frame, helping to prevent hull damage, and providing trailer visibility when backing up. Features side-to-side adjustment to allow optimum fit to most trailers. Mounting instructions and all necessary hardware included. Item #092440101. $83.09
	Fulton Custom Boat Roller Guide Ons help you keep the boat centered, saving time and possible damage when launching and loading. Universal bolt-on mounting system fits all trailer frames up to 3" wide by 5" tall, no drilling or cutting required. The exclusive Galva-Tec finish exceeds industry standards for corrosion protection, providing long lasting value. Unique non-marring cushioned rollers extend 20" up from frame, helping to prevent hull damage. Adjustable to allow optimum fit to hull design. Mounting instructions and all necessary hardware included. Item #092200101. $104.54
	Lewmar Ocean standard winches. Aluminum alloy body. Bronze gears and center drum. Stainless steel roller bearings. Size 6: 6.8:1 power ratio, 1 speed - $119.99  #61900 Size 8: 7.9:1 power ratio, 1 speed - $206.99  #61904
	Lewmar Ocean self-tailing winches. Aluminum alloy body. Bronze gears and center drum. Stainless steel roller bearings. Minimum friction feeder arm. Size 16: 15.8:1 power ratio, 1 speed - $491.99  #61914 Size 30: 13.8:1 / 29.2:1 power ratio, 2 speed - $794.99  #61916 Size 40: 13.2:1 / 40.2:1 power ratio, 2 speed - $939.99  #61918
	Service kit for Lewmar Ocean standard and self-tailing winches. Genuine Lewmar parts. For size 6 - 64 standard winches - $42.99  #61937 For size 16 - 66 self-tailing winches - $65.99  #61938
	Lewmar alloy winch handles with lock-in PowerGrip and ball bearings. The 200mm/8" handle is for lower loads or very rapid action. The 250mm/10" is for heavier loads and produces the maximum power ratio for the winch. Size: 200mm/8" - $82.29  #61931 Size: 250mm/10" - $103.99  #61939
	Marine  hatch / locker gasket is made of EPDM, known for its excellent ozone, weathering, and aging resistance. It is not recommended for resistance to oil, gasoline, and hydrocarbon solvents. Used on the Macgregor 26. Item #47084. $2.89/foot.
	Marine port gasket was widely used on many Canadian-made boats, including the CS22, CS 27, Grampian, Halman-Horizon,Tanzer, C&C, Mirage, Northern 29, and others. Item #54666. $2.94/foot. Internet Only Special! $1.99
	Marine all-vinyl edge trim has a serrated metal reinforced self-locking insert. Just snap it on and it stays put. Excellent trim for rough edges of fiberglass. Will bend into a 4" circle. Ideal for use on bottom of gas cans. Off-white color. Item #21205. $1.59/foot.
	Our Mast Cap fits pre-2003 MacGregor boats and the Vandestadt & McGruer Sirius 21. Made of very durable black nylon. Also fits our Marine Mast Section below. Ideal to mount a wind indicator on. Item #47041. $9.99
	Marine-grade Mast Section. Aluminum alloy, anodized clear color. 4" x 3" section. Length: 20'. Item #93571. $125.00
	Our End Cap fits our Aluminum Extrusion below. Can be used as a cap in a mast-based application or as an end cap for a boom. Item #47042. $7.99
	Marine-grade Aluminum Extrusion. Aluminum alloy, anodized clear color. 2 7/16" x 2 5/8" section. Length: 18' - $99.00  #93531 Length: 7'-8 1/2" - $49.00  #93554

Norseman Swageless Terminals
Item	Wire Size / Type	Dowsar Item #	Internet Price
Norseman Cone CC-060	6mm / 1 x 19	43294	$5.40
Norseman Cone CC-060	6mm / 7 Strand	43304	$4.40
Norseman Cone CC-090	9mm / 1 x 19	43297	$8.75
Norseman Cone NCC-05	4mm - 5/32" / 7 Strand	43301	$3.75
Norseman Cone NCC-06	5mm - 3/16" / 7 Strand	43302	$3.80
Norseman Cone NCC-07	5.5mm - 7/32" / 1 x 19	43293	$4.50
Norseman Cone NCC-10	8mm - 5/16" / 7 Strand	43305	$17.00
Norseman Eye N10-050-5/16	5mm - 3/16"	43262	$37.34
Norseman Eye N10-090-1/2	9mm	43267	$81.59
Norseman Fork N20-040-5/16	4mm - 5/32"	43269	$29.98
Norseman Fork N20-070-1/2	7mm - 9/32"	43273	$54.39
Norseman Fork N20-090-5/8	9mm	43275	$91.89
Norseman Stud NO30-0714-7/16	5.5mm - 7/32"	43279	$39.00
Norseman Stud N30-060-7/16	6mm	43280	$39.00
Norseman Stud N30-090-5/8	9mm	43283	$87.59

* Restrictions Apply -- See Shipping Information in our Online Store.

Pricing is only guaranteed for online purchases that are shipped.

© 2014 Dowsar Yacht Sales Limited. All rights reserved.